AIR LOOP Foam

The product is generally formed of bare cloth, and there is no foam structure inside the product. It is a D-shaped foam that cannot be completed on a traditional conductive foam forming machine.

AIR LOOP Foam Classification：

  1. Straight AIR LOOP Foam                                  2. Curved AIR LOOP Foam                       3.Combination AIR LOOP Foam

       

 

 AIR LOOP foam, die-cutting two parts, one product is the conductive cloth part, and the second product is the PET part

一. Die-cut conductive cloth  We currently use round knives to complete this process.

1. The uniform height of the general straight type is divided into two knives to form, namely: separate the inner side of the bottom large rubber, attach the conductive cloth and then attach the MYLAR, and then cut the shape.

2. For other types, after repairing the large glue, attach the conductive cloth, and then trim the small glue and MYLAR, and then cut the shape.

二. The following points should be noted for die-cutting of such products:

1. The conductive cloth is stretchable, and the tension cannot be enlarged during die-cutting

2. TT219 type conductive adhesive is prone to pull the glue, please pay attention to attach it to the bottom blue release film first

3. There are many working stations and many materials, pay attention to the alignment of the die and the length of the product

 

 

 

Publication Date: 8 December, 2021

Category: AIR LOOP Foam

Tags: AIR LOOP Foam

Authors: Konlida

Commentaries: No comments currently