Synchronous pulley
Gear
KONLIDA can customize non-standard synchronous timing belt pulleys, models, specifications, size, parameters according to the customer's requirements....
KONLIDA can customize non-standard synchronous timing belt pulleys, models, specifications, size, parameters according to the customer's requirements. When designing synchronous pulleys, the institution should be easy to manufacture, the quality distribution is uniform, the weight is light, and the weight is light. And avoid excessive internal stress due to casting.
When V> 5m/s, a static balance is performed. When V> 25m/s, actions balance. The ash cast iron, 45#steel, aluminum alloy, copper or engineering plastic. ≤ 30m/s, v ≥25+45m/s, use HT200. It is advisable to use creating raw iron-boiled steel parts. plastic
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
| Range of Processing | ||
| Project | Konlida factory processing requirements range | |
| Timing Belt Pulley/Synchronous Pulley/htd timing belt pulley | ||
| Material | 6061、S45C、SUS304 | Can be customized according to request |
| Degree of Concenttricity | 0.02-0.04mm | The maximum can be achieved within 2 silk |
| Surface Treatment |
Natural anodizing, black anodizing, hard anodizing treatment Nickel plating, blacchening |
Treat according to customer requirements |
| Standard Type | P8M 5M/S8M 5M 3M/HTD8M 5M 3M/S8M 5M 3M/2 3 5GT/L XL MXL H Timing Belt pulley/Synchronous Wheel | customized according to request |
| Other Type | Cone set/Hard anode/Stainless Steel synchronous Pulleys | customized according to request |
| Heat Treatment | scheduling, high frequency, nitriding | (incoming material) according to the requirement to customized processing of gears |
| Type of Gear | Timing Belt Pulley/Synchronous Pulley/htd timing belt pulley/gt2 timing pulleys | |
Gear Name: Timing Belt Pulley/Synchronous Pulley
Gear Type: Aluminium Alloy/Steel Timing Pulley V belt driving pulleyTrapezoid
- MXL/XL/L/H/XH/XXH
- T-type T2.5/T5/T10/T20/AT3/AT5/AT10/AT20 and
- 2M/3M/5M/8M/14M/20M/S3M/S5M/S8M/S14M Synthconous Belt Pulley
Material: aluminum alloy, C45 steel, copper carbon steel, cast iron, brass, engineering plastics and other special materials.
Surface: Black Anodized, Natural Anodized, Hard Anodized, Zinc Plated, Nickel Plated, etc.
Size: standard parts can be customized
Gears Keywords:synchronous pulley/V belt driving pulley/Timing Pulley/Timing belt pulley/htd timing belt pulley/timing belt and pulley/timing belt pulleys/gt2 timing belt pulley/gt2 pulley/timing pulleys/Synchronous wheels/toothed belts and pulleys
Features:
The matching of synchronous pulley and synchronous belt has the characteristics of accurate transmission, balance, low noise, no slip and energy saving, and the compact structure is suitable for multi-axis transmission, oil resistance, moisture resistance, no need for lubrication and other advantages.
- Trapezoidal tooth timing belt (MXL/XXL/XL/L/H/XH/XXH)
- T-tooth timing belt (T2.5/T5/T10/T20)
- AT tooth timing belt (AT3/AT5/AT10/AT20)
- S tooth timing belt (S2M/S3M/S4.5/S5M/S8M/S14M)
- At arc tooth timing belt (3M/5M/8M/14M/20M)
- Parabolic tooth timing belt (P2M/P3M/P5M/P5M/P8M)
- GY tooth size (G2M/G3M/G5M/Y8M)
Standard Timing Belt Pulley/Synchronous Belt Wheel Type:
- Type -free high -torque synchronization with wheel P8M/P5M/S8m/S5M/S3M/T5
- Pickled high -torque synchronous strap wheel S8M/S3M/HTD8M/HTD5M/HTD3M/type
- High -torque synchronous strap wheel S8M/S3M/S2M/P8M/P5M/P3M/P2M/HTD5M/HTD3M/8YU/5GT/3GT/2GT type
- Synchronous belt wheel T10/T5 type
- Trapezoidal toothed synchronous belt wheel H/MXL/L/XL Type
- Lazy wheel
- Bring -edged tooth -shaped lazy wheel S5M, S8M, S2M, S3M, HTD3M, P2M, P3M, P5M, 2GT, 3GT, 5GT, 8YU, MXL, XL, L, HTD5M, HTD8M, T5, AT5, AT10, AT10, AT10 type
Application:
Widely used in mechanical transmissions in textile, machine tool, tobacco, printing, packaging, food, inkjet, sewing, petrochemical, fitness equipment, engraving and other industries.
Contact Konlida Get drawing and quotation Oem custom machining gear Gear Type Power Transmission Gears Machinery Accessories Gears Gear Material Steel iron plastic material Small size light weight long life Gear module tooth number 49 kinds of modulus 0.1 to 45 mm Tooth number from 2 to 120 teeth 16 years CNC experience 48000㎡ factory 7 product machining craft 4 quality control Accuracy ±0.002mm Experienced team high precision low noise Imported process machine Quality inspection system 100000 dust-free workshop 3 4 5-axis equipment Surface treatment Ra1.6 Process high tolerance low wear long life gears Small batch trial order 15 working days delivery 1 piece quick proofing Oem Custom machining gear Running stability Complete specifications
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
Related Products
Expert In Custom Solutions For More Efficient Electromagnetic Shielding Components
no data
Mob:+86 189 1374 9061
Tel: +86 0512-66563293-8101
Email: sales22@konlidacn.com
Address: 88 Dongxin Road, Xukou Town, Wuzhong District, Suzhou City, Jiangsu Province, China
ABOUT US
Copyright © 2024 KONLIDA | Sitemap
