Roller Chain
Gear
Chains can be divided into roller chain, toothed chain and other types according to the structure.
Chains can be divided into roller chain, toothed chain and other types according to the structure.
Chains are made of carbon steel or alloy steel and heat-treated to improve strength, wear resistance and impact resistance. Roller chains can be made into single-row chains and multi-row chains. When transmitting high power, double-row chains or multi-row chains can be used. The carrying capacity of multi-row chains is proportional to the number of rows. However, due to the influence of precision, the load on the side-by-side chains is not easy to be uniform, so the number of rows should not be too much.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
| Sprocket Chain | Nomianl Model | 06B | 08B | 10B | 12B | 16B | 20B |
| Number of Teeth | 10-30 | 10-30 | 10-25 | 11-25 | 11-25 | 9-20 | |
| Number of Links | 4 sections - can be customized | ||||||
| Chain Number | Pitch (p/mm) |
Roller Diameter (d/mm) |
Ultimate Tensile Load (Single Row) (Q/kN) |
Mass per unit length (single row) (q/kg/m) |
| 06B | 9.525 | 6.35 | 8.9 | 0.40 |
| 08A | 12.70 | 13.8 | 13.8 | 0.60 |
| 10A | 15.875 | 21.8 | 21.8 | 1.00 |
| 12A | 19.05 | 31.1 | 31.1 | 1.50 |
| 16A | 25.40 | 55.6 | 55.6 | 2.60 |
| 20A | 31.75 | 86.7 | 86.7 | 3.80 |
| 24A | 38.10 | 124.6 | 124.6 | 5.60 |
| 28A | 44.45 | 169.0 | 169.0 | 7.50 |
| 32A | 50.80 | 222.4 | 222.4 | 10.10 |
Material: Steel, C45 Steel, A3 Steel, Stainless Steel, 40Cr
Surface Treatment: Black Anodized, Galvanized
Gear Keywords:Sprocket Gear Chain
Size: custom roller chain gear size or standard
Tags: roller chain gear
Features:
- Multi-tooth bearing, safe and reliable;
- Flexible transmission to absorb shock and vibration;
- The center distance range is large, and the manufacturing and installation accuracy requirements are low;
- Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, which is suitable for high temperature .
Konlida processes customization, transmission chain, conveyor chain, plate chain, engineering chain, escalator chain, special chain, agricultural machinery chain, parking equipment chain to meet customer customization and are widely used in aviation, ships, construction machinery, logistics transportation, escalators, cement, mining, agricultural machinery, hoisting, health care, parking equipment and other fields.
Application:
Widely used in aviation, ships, construction machinery, logistics, escalators, cement, mining, agricultural machinery, lifting, health care, parking equipment and other fields.
Each part of the transmission chain is made of carbon or alloy steel and is heat treated to improve strength, wear resistance and impact resistance. Roller chain can be made into single row chain and multi-row chain, when the transfer of high power, can use double row chain or multi-row chain. The carrying capacity of multiple rows is proportional to the number of rows. However, due to the influence of precision, the load borne by the side-by-side chain is not uniform, so the number of rows should not be too much.
ach part of the transmission chain is made of carbon or alloy steel and is heat treated to improve strength, wear resistance and impact resistance. Roller chain can be made into single row chain and multi-row chain, when the transfer of high power, can use double row chain or multi-row chain. The carrying capacity of multiple rows is proportional to the number of rows. However, due to the influence of precision, the load borne by the side-by-side chain is not uniform, so the number of rows should not be too much.
Contact Konlida Get drawing and quotation Oem custom machining gear Gear Type Power Transmission Gears Machinery Accessories Gears Gear Material Steel iron plastic material Small size light weight long life Gear module tooth number 49 kinds of modulus 0.1 to 45 mm Tooth number from 2 to 120 teeth 16 years CNC experience 48000㎡ factory 7 product machining craft 4 quality control Accuracy ±0.002mm Experienced team high precision low noise Imported process machine Quality inspection system 100000 dust-free workshop 3 4 5-axis equipment Surface treatment Ra1.6 Process high tolerance low wear long life gears Small batch trial order 15 working days delivery 1 piece quick proofing Oem Custom machining gear Running stability Complete specifications
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
Related Products
Expert In Custom Solutions For More Efficient Electromagnetic Shielding Components
no data
Mob:+86 189 1374 9061
Tel: +86 0512-66563293-8101
Email: sales22@konlidacn.com
Address: 88 Dongxin Road, Xukou Town, Wuzhong District, Suzhou City, Jiangsu Province, China
ABOUT US
Copyright © 2024 KONLIDA | Sitemap
